How to create glossy lacquer finish panels

To create a glossy lacquered finish on panels, you can follow these general steps:

1. Prepare the surface: Start by ensuring the panels are clean, dry, and free of any dust or debris. Sand any rough spots or imperfections to create a smooth surface.

2. Prime the panels: Apply a high-quality primer specifically designed for wood or MDF surfaces. The primer will help enhance adhesion and create a smooth base for the lacquer.

3. Apply multiple coats of lacquer: Use a high-gloss lacquer paint or spray to apply thin and even coats onto the panels. It's best to apply multiple coats, allowing each coat to dry completely before applying the next. Follow the manufacturer's instructions for the recommended drying time.

4. Sand between coats: After each coat has dried, lightly sand the surface with fine-grit sandpaper. This helps to remove any imperfections, bubbles, or dust particles and promotes better adhesion for subsequent coats. Wipe away any dust before applying the next coat.

5. Polish and buff: Once you have applied the desired number of lacquer coats and allowed them to dry completely, you can proceed to polish the panels using a high-quality polishing compound. This will help further enhance the glossy finish and remove any minor imperfections.

6. Finishing touches: Once the lacquer has fully cured, you can reattach any hardware or handles if desired. Take care when handling the panels to avoid scratching or damaging the glossy surface.

Please note that achieving a high-quality glossy lacquered finish can require skill and experience. YALIG has more than 20 years of production experience and a complete paint process production plant. We have rich experience and professional equipment. We welcome your consultation.